Features

• JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles are used.
• Attractive 18-gauge perforated, steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage.

Specifications:

System Type: 15" 2-way, sound reinforcement speaker

4 Frequency Range (-10 dB)1: 53 Hz – 19 kHz

2 Frequency Range (-10 dB)1: 41 Hz – 18 kHz

4 Frequency Response (±3 dB)1: 80 Hz – 14 kHz

2 Frequency Response (±3 dB)1: 59 Hz – 13 kHz

Sensitivity (1w/1m): 99 dB

Nominal Impedance: 8 

Power Capacity:1 250 watts

Peak Power Capacity:1 1000 watts

Recommended Amplifier 250-500 watts

Power: @ 8 

Maximum SPL: 129 dB

Nominal Dispersion: 90° x 50°

Crossover Frequency: 2.2 kHz

Dimensions (H x W x D):3 699 mm x 460 mm x 432 mm

(27.5 in x 18.1 in x 17 in)

Weight: 27.4 kg (60.5 lb)

Shipping Weight: 30.4 kg (67 lb)

High Frequency Driver: JBL 2414H-C , 1" exit compression driver mounted on

Progressive Transition™ Waveguide

Low Frequency Driver: JBL M115-8A

Input Connectors: Parallel Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1)

Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard); with

glued and mechanically fastened joint detail; covered in

black carpet .

Grille: 18-gauge, powder-coated steel

Mounting & Suspension: 36 mm, dual-angle pole-mount socket

1. “Power Capacity” and “Peak Power Capacity” ratings are based on the average and peak power